Good morning folks,
after which I was very excited about the result and have seen the current test on the battery life is very positive, despite it was this morning finally arrived. The test began.
And here the result:
are yet to be told that I also unload the USB 2 Module I .. What started with a simple command "rmmod ehci_hcd" was done.
So at full capacity of the battery, I come to fewer than 11.8W !, I am charmed to the utmost and I am in love again ... :)
In my notes, the Thinkpad T60p:)
If one takes into consideration that has burned up in a default, the Notes around 26-28 watts and the fan was on the run all the time, this state is just perfect. Of course, you see the other side of the medals. The modifications should, of course, to a grab only on battery power, which was supposed to be thanks to laptop-Tools no problem. To other is the comfort to some extent. In practice this means the device at the usb plug of each module must be loaded. But which for a small script or an alias can be done easily.
What is still emulate:
The logs have to be diverted to the disk cache. If you use the standby of the top one can certainly more than half an hour (depending on the setting and taste) the start without the hard drive has to work .. (OOo or Web) provided, of course, the program is already open. Especially in the area there are the Firefox Web (2 and 3) problems. These have, as far as I've read a SQ-LITE run on, which is of course on the plate and is requested at every page request. There is a way to transfer them in the disk cache. Who does not want to do that has access to the Opera, which produces no access to the hard disk, the page request. What
enormously affects the consumption of the display is clear, logical! When writing this article I have the brightness on the second-highest level and powertop still shows a consumption of 13.8 watts. I turn now one step higher (highest level) there are around 15 watts. Unbelievable! But
written enough for today .. Until next time.