Letter Of Recommendation For Study Study Abroad

Tutorial: General Settings

This tutorial refers to the general settings of "all" resource.

first Resolution of the monitor CRT + TFT

The "CRT" tube monitor, always use the optimum size resolution for the monitor is meant to be eg 17 "= 1024 x

When TFT 768 necessarily use the native resolution eg 17" = 1280 x 1024
19 "1600 x 1200! because otherwise everything will be calculated down what performance cost.

second color quality in Windows

right click on the desktop and then properties then settings to the color quality, good computers bit 32 set to 16 bit computers in poor medium quality.

third Video driver set

As described above under 2 proceed and go on expanding.
There, in the driver put everything on menu performance.

4th The graphics ingame menu

In DoD: S on Options, and then expanded graphics, there should be anything left on the settings that are marked with an asterisk, because the optimal values are working with which the graphics card. Except
HDR = High Dynamic Range should issue because that really takes a lot of performance. If you ever
everything with "low" and then playing with "*" then you will Remember that there is nothing changed but with the "*" settings everything looks much better.

5th Graphics card driver

Use always the latest driver for your graphics card to get because the manufacturer always the largest possible in the graphics card and therefore a current driver is always better. use
For graphics cards from ATI, in any case, the Omega drivers because he always brings out even more power than the normal ATI directly. take

link for Omega drivers

always the top of it.

more updates to follow ... ...

greeting [GC] Grimmi & Strike

Herpes Outbreaks During Bootcamp

Tutorial: Teamspeak on Linux

Toturial This deals with the installation / configuration of a TeamSpeak server on Linux.

---------------------------------------------- -------
Author: Michael Weishaar
Homepage: HowTo DB.net

Content:


Installation:
- 1.0 - Prepare
system - 1.1 - Download / Install files
- 1.2 - Start Teamspeak

configuration:
- 1.3 - The web interface
- 1.4 - The server.ini
- 1.5 - The server.log
- 1.6 - The server.dbs
- 2.0 - Router configuration
- 3.0 - Create backup
- 4.0 - Install a Banner

- FAQ (Frequently Asked Questions) FAQ Official and / or TeamSpeak access
(At this point time thanks to the complete TSE team especially at Ch'ih-Yu, who made the effort to the home page including the FAQ system is set up!)
------------------------ ----------------------------- -------------------

---------------------------------------
1.0 System prepare
- -------------------------------------------------- ------
We open the console or log us via SSH.

We will root with: su

First we create a new user, so that we can later run TeamSpeak with him

useradd ts

Now we have added a new user.
We create the user "ts" a directory with:

mkdir / home / ts

Now we must assign to the user "ts" a home directory, run in which he all necessary rights for the for TeamSpeak will possess:

chown-R ts / home / ts

The user now requires only a password with which they can log in via SSH:

passwd ts

Now we must enter the password.
We change to the user "ts with:

su ts

Now we can move with the user in our home directory:

cd / home / ts

---- -------------------------------------------------- ----
1.1 File Download / Install
----------------------------------- -----------------------
So, now's it. We invite our team to speak to our computers:
(Gentoo users can simply "emerge teamspeak2-server-bin" in the console and then continue with the same item 1.2)

wget ftp://ftp.freenet.de/pub/4players/teamspeak.org/
releases/ts2_server_rc2_20201.tar.bz2

(current links on the homepage offliziellen : http://www.goteamspeak.com ) Depending upon the connection of the computer, the download may take some time. can


tar jxvf ts2_server_rc2_20201.tar.bz2

Depending on performance this may take some time to complete:
We unpack the archive with.

------------------------------------------------ start ----------
1.2 TeamSpeak
------------------------------- ---------------------------
Now we go with:

cd tss2_rc2

just unpacked in our directory.
Since TeamSpeak a startup script included requires only a:

./teamspeak2-server_startscript start

to start the server. If a:

TeamSpeak Server Daemon started with PID ****

appears, he has started successfully. The whole thing we can add: Check

./teamspeak2-server_startscript status

lot again. Other Commands:

• ./teamspeak2-server_startscript stop - Stops the server

./teamspeak2-server_startscript • restart - Restarts the server

• ./teamspeak2-server_startscript passwords - Is the Super Admin and Admin password from - Which brings us to the next point. We write:

./teamspeak2-server_startscript passwords

in the console to the super admin password to get. (This is not a standard but a password-generated, it does not have to be changed!)

------------------------------- ---------------------------
1.3 WebInterface
-------------- --------------------------------------------
Now we can on the browser with


• http://ip.des.servers:14534


or


• http://localhost:14534


log into the web interface. The interface itself is self-explanatory.

Back to the shell: In
teamspeak directory we find the server.ini, that: mcedit

server.ini

can be opened.

------------------------------------------------ -------
If that does not mcedit, the mc-editor will only Installed:

Debian: Easy Enter "apt-get install mc".
Gentoo: Just type "emerge mc".
All other distributions: click

The package is then installed with "rpm-ivh PACKAGE" (Under Debian and Gentoo, this step is not necessary)
-------------- ----------------------------------------- -------

-------------------------------------------------- -
1.4 server.ini
-------------------------------------- --------------------
[Main Config]
BoundToIp1 - values 0.0.0.1 through 255.255.255.255 - Default: empty - If the server has multiple IP addresses "owned" can Teamspeak assigned an IP be.
ExternalIPDetection - values 0 or 1 - Default: 1 - This function should remain at 1, as the TeamSpeak server will even referring to the server IP "concerned."
HTTPServer Port - values: 1 through 65535 - standard value: 14534 - This is the port for web interface of TeamSpeak.
HTTPServer Enabled - values: 0 or 1 - standard value: 1 - This function determines if the web interface or should be turned off.
DateTimeFormat - values: any changed - Default: nn:: dd-mm-yyyy hh ss - The time for Teamspeak
TCPQueryPort - values: 1 through 65535 - standard value: 51234 - Specifies the port to access the server via Telnet (advanced).
AllowedClientNameChars - values: AZ + special characters - default: empty - The permitted letters / characters in the nickname of clients to the server connect (makes more sense to the next setting).
DisAllowedClientNameChars - values: AZ + special symbol - standard values: ()[]{} - may occur The letters / symbols which are not the nickname of the client.

[Debug]
message types - values? - Default: This setting LMTALL best LMTALL
MessageDepths - values? - Default: LMDALL - This setting is best LMTALL

[WebPost]
These settings can be comfortably managed in the web interface (Global Settings).

[Log]
access_r - values 0 or 1 Default: 0 - Logs the action registered (If a user registers or joins the server)
access_u - values 0 or 1 Default: 0 - Logs the action registered (If a person registers or joins the server)
channel_registered - values 0 or 1 Default: 0 - Logs the Action registered channel (If a channel is registered or erased)
channel_unregistered - values 0 or 1 Default: 0 - Logs the action unregistered channel (If a unregistered channel is created)
Sat - values 0 or 1 Default: 0 - Logs the action server admin (If a server admin joins the server / get someone ServerAdmin / somebody ServerAdmin taken away from)
chat - values 0 or 1 Default: 0 - Logs the action Chat (If User / admin / registered under via chat)
kick_server - values 0 or 1 Default: 0 - Logs the action server (If somebody kicked from the server) is
kick_channel - values 0 or 1 Default: 0 - Logs the action channel (If somebody is kicked from a channel)

[Spam]
These settings can be managed comfortably in the web interface (Global Settings ).


----------------------------------------------- -----------
1.5 The server.log
---------------------------- ------------------------------
be in her


• The results of the log settings for the server.ini stored. •
saved configuration changes. (Start the server / start a virtual server etc..)
• Any errors stored. (Useful here in the forum!)

----------------------------------------- -----------------
1.6 server.dbs
---------------------- ------------------------------------
• In server.dbs all information about the virtual servers stored. (Among other things, the channel, server name, etc..)


------------------------------------ ----------------------
2.0 Router configuration
--------------------
-------------------------------------- If you use a router on the internal network, it must be configuration settings on the router make, before other users with your TeamSpeak server outside the internal network, so they can connect to the Internet. You yourself have up with the internal IP to connect 192.168.xx So, if you installed the server on your private network.
because there are countless models of routers, it is very difficult to explain this as simply as possible. You have to think for yourself a little. Normally all routers

have its own "home page" can be made in the various settings.
So open the browser and enter http://192.168.0.1

one. If appear a window with a password prompt, the user typically

admin

and password

1234

If you are sure that you user name and password you entered correctly, and weather the access is denied => read the manual of the router.
If the window does not appear, so you can try it with

http://192.168.1.1

. If the window still does not appear => read the manual of the router.

I assume that we are now on the home page of the Router Homepage " . Are Please do not change any settings unless you know what it means.
As I said, there are many different models of routers, so you must own the "home page" to "Port Forwarding" Search "Port Sharing", "Virtual Server", "ports" or something similar.
There should be at least 2 text fields:
The text box in the required port is entered and the text box in your local IP address must be entered (192.168.xx). TeamSpeak uses the following ports:

- 8767 would be the standard UDP port. (Only the latter is necessary in order to connect to the server from outside. If a new virtual server is started on port 8768, then the port-sharing must also be configured for this)

- 14534 would be the TCP WebInterfaceport. (The Administration)

- 51234 would be the TCP Telnet port. (Advanced)

After entering the desired port on the button "Save", "commit" or something similar, otherwise the settings are not saved!

------------------------------------------------ create ----------
3.0 Backup
------------------------------- ---------------------------
Sometimes it makes sense, in between making a backup (backup) of the TeamSpeak server. In the event of a takeover of the server or through stupidity it can happen soon, that is with empty hands. Just in this section, we want to prevent that (There are also other ways to create a backup of files, however, are the scripts which require more knowledge of Linux as a beginner, you can damage both the system's why we will do it on the ".. simple way.)

For us, that is, the server.dbs (in which the information for all servers, channels etc. are included) and the server.ini (contained in the complete information about the settings of the TeamSpeak server) important.
Since we are lazy and have no desire to copy the files to another PC / server, we will pack the two files into a. Tar.gz archive. So we go into our teamspeak directory and type: tar-

cvzf backup.tar.gz server.dbs server.ini

And already we have every two files in the archive.
Now we have several ways to get the archive from the server. We take one of the easiest: WinSCP
The program is actually self-explanatory. As simply log with a SSH client. From there you can, as in Explorer just download the file on the local PC.

And already we're done!

If we want to work back up again, we copy the file with WinSCP from your PC to the server (the teamspeak directory) and type:

tar-zxvf backup.tar.gz

------------------------------ Install ----------------------------
4.0 Banner
------------- ---------------------------------------------
the final release of TeamSpeak 2 is it possible to install a banner in TeamSpeak. This is in the client in there, showing where in the channel information. Currently, there is unfortunately only possible to configure a banner for the whole server and not for the individual virtual. Another problem: If the client changes its window size, the banner is in the same proportions.

. IMPORTANT: The banner must be in jpg format, otherwise it will not be displayed!

We have to log in as usual with the SSH client, to the teamspeak directory and the command mcedit

server.ini

(or other editors such as nano, pico, vi ...) the configuration file teamspeak open.
There we find the entry

ISPLinkURL =

we modify as follows

ISPLinkURL = http://www.deinedomain.de/

This setting is the banner with the specified URL link. The client deinedomain.de will be redirected to when they click on the banner. If you want to not do that, then just leave this setting blank.

very bottom of the server.ini we enter the following:

[ISP] GFX URL = http://www.deinedomain.de/images/banner.jpg

What you see is there now is the absolute path to the banner.
If you used the mceditor to end with "F10" again (But do not forget to save). That just made our
settings are also recognized by the server, we need the TeamSpeak server with

./teamspeak2-server_startscript restart

just reboot.

(The banner is stored in the imagecache.ini the client. Unfortunately, the banner is not updated when you change the banner again. The user will most likely still have the banner until he re-formatted whatsoever. Through the image cache. ini (the file is hidden - C: \\ Documents and Settings \\ your name \\ Application Data \\ teamspeak2 \\), the banner will be updated again)

Tuxedo Sewing Pattern Womens

Tutorial: Optimize Netsettings! with cfg

..

DOWNLOAD

Instructions:

See a set of precisely and accurately noted in this order
Netsettings takes time and is not done in 5 minutes flat calm but
1 hour or more one.

Save the netsettings.cfg under

C: \\ Program Files \\ Steam \\ SteamApps \\ YOUR NAME \\ day of defeat source \\ dod \\ cfg

Open your config.cfg and add the line: exec

. netsetting.cfg

added.

Start the game and connect to any server.
Go to viewers and watch several players
look at you the whole time the netgraph.
netgraph's with " netgraph 3" in the console.
linger for several minutes with each player and watch
run changes in combat situations or with the normal.
wild never switches back and forth.
Changes you take mostly only true after 10-30 seconds.

The "i" change the entry so

1st installment
2.cl_updaterate
3.cl_cmdrate

and begins again with 1st installment on again etc. 2.cl_updaterate

Press "j" changes always the value in 10 or 1000 steps in rate.

So once "i" button to rate "the current value is displayed in the Console
and then once on button" j "
then the value for rate increases.
If you now between it is with ESC in the Console staring you see the changes
and which value has just changed

example.: Press the "i", console displays values with the 1000 rate
press "j" and the console shows the console worth in 2000 to press
"j" again shows the value 3000 press console to
"j" again shows the value 4000 to
etc.

"i" key then is cl_updaterate console displays worth 10 to
"j" key console shows the console to exceed 20
press "j" indicates the console worth 30
to press "y" shows the value 40 to
etc.

After each change a few seconds and watch the netgraph
then you also see changes

So TESTING, TESTING, TESTING, TESTING, AND TEST AGAIN.

greeting [GC] Grimmi & Strike

Japanese Exploitation Films

FAQ

FAQ:

FAQ * = = friendly friendly Asked Questions asked questions :-)

Costs at this page?
NO the use of this site is totally free and is also completely free to stay future.
We want to be published not only our intellectual property as your own.
Why is this page?
Anyone who has played more games from Valve, the game is exploring ways to adapt its requirements in hardware and so on. As the search is very complicated, however, since many pages are in English, we have created this page so you have to find everything here and not find awkward together.
I understand now what does one not?
We always try all TUT `s just so as low as possible. If you do not understand something once but you can under the respective TUT on "comments" to put your question we are working as quickly as possible and answer you as well.
I do not know how xxxxxxx in DOD: s to make ?
No problem ;-) If you simply write miss a TUT TUT on some comment with what you have missed here. We will as soon as possible realize for you.
Where can I find what?
On the left side you will find all TUT `s Alphabetical order. With a click on the link you get to a page in this TUT `s.
I found a TUT what does my friend and now urgently?
Just click on the appropriate TUT on the envelope and send your buddy the corresponding TUT or link to this page.
Have your own server?
No, currently we do not own the server. But there will be after the summer holidays have another one. The last root server was closed because, unfortunately, none of our members more than 5 euros a month had :-(. But that will soon be a thing of the past ;-)
Who are you?
Grimminalbullizei Age: 36 Location: Münster	Strike Age: 17 Location: Hannover

Profesional Hd Filter

tutorial. profit sound quieter or exhibit!

Here we have ever written a tutorial of what you to describe how the profit sounds either very weak or exhibits.


For low gain sounds following download:

Dods-WinSound-quiet >> Download <<

for a profit the following sound Download:

Dods-WinSound off >> Download <<



Step 1: open

the loving downloaded rar * file and copied the contents (2 sounds) to

C:. \\ Program Files \\ Valve \\ Steam \\ steamapps \\ YOUR ACCOUNT NAME \\ day of defeat source \\ dod \\ sound \\ ambient

PS: If folder does not exist, just create.


DONE


* rar = algorithm and file format for data compression


MFG [GC] Strike & Grimmi

Cipralex Kidney Stones

Tutorial: Quake sounds Dods! change HUD-free

We have you ever written a tutorial describe what you want to install to your Quake Sounds Dods server up and running.

requires the following:

Mani Admin Plugin >> Download <<
Quake sound pack >> Download <<

INFO:

The Mani-Admin plugin must be installed active Irishman to Quake Sounds!

Step 1: Unzip the

Quackesound pack and opens it.

Now you can see 2 folders> sound and cfg < öffnet den sound Ordner und kopiert den quake Ordner auf euren Server nach

dod / sound /

now opens the cfg folder where you see a folder and a. Cfg file mani_admin_plugin> and mani_quakes_ounds.cfg <

mani_admin_plugin opens the folder and copies the quakesoundlist.txt on your server after

dod / cfg / mani_admin_plugin /

Now go back to the cfg folder and copy to your own server mani_quake_sounds.cfg after

dod / cfg /


Step 2:

Go now to your server in the cfg folder and open the editor

* changes mani_quake_sounds.cfg now behind mani_quake_sounds the 0 to 1 ! (IMPORTANT)



Saves and opens the mani_server.cfg with your editor.

write now at the bottom following purely

exec mani_quake_sounds.cfg

Saves everything from start and the server.



DONE



* Editor = Notepad creates unformatted text in ASC II format.



MFG [GC] Strike & Grimmi

What Is Strep Of The Butt

Tutorial:: Tutorial

whom the normal HUD is too boring, it can hereby make completely free.

* HUD = Head Up Display = Display Kills / flags / ammunition, etc.

I have the whole thing in German, rewrite courtesy of Insane, allowed.

homepage of Insane

here only once to an image so that you can also see you all in advance exactly what is meant.



If you want to install it, you load down the installer and the rest is "WICHTIG.txt Read me" in the described.
An uninstaller for this is contained there also, you should he not fallen.
You can find him after the installation:

C: \\ Program Files \\ Steam \\ SteamApps \\ YOUR NAME \\ day of defeat source \\ dod

DOWNLOAD 314KB

greeting [GC] Grimmi & Strike

Symptons Of A Chest Infection?

Add me Google

Here is an explanation of what has me looking to add Google button with us and what you can do with them great.
The button is there that you never miss more news about us!
Since most of the browser before the Google home page will have the enhanced version.

If you are still using Internet Explorer, we recommend that you download the Mozilla Firefox browser you because it is much faster and safer than IE Micro Goofy. The browser you are

-> here <-



first Setting

Go to Mozilla Firefox, click Tools / Options / General home page and enter "http://www.google.de/ig" .

Google.es is the same page as Google that you can only adjust it to your personal needs and are always up to date, what information you want and always have.

second Sign

Register for free! , and now you can modify your personal Google.es page.

third Setting

All fields you want you can move freely and "Add Content" get you on the following pages enough range of AZ.

4th ADD me Button

clicking on our page on the Google button Add me you will be redirected to a page, see picture, so you can use our site to add to your personal Google.es.



5th Ready

Now you see it every time something new on our site is what you do not want to miss.
And since you umpteen times a day before the browser has to open one does not always click through all the pages for updates but has everything at a glance.

Genial wa ;-)


greeting [GC] Grimmi & Strike

La Fitness Prices 2010

Tutorial: Server list Knowledge

If you open the server list again and they looks really gets very accurate information.

server list open by right click on Steam and then select server.

In the server list then right click on server and as shown in the picture is you can choose all kinds of useful.

Refers to whether the server: bots, VAC, IP, public clan, etc. has.



greeting [GC] Grimmi & Strike

White Discharge During 38 Weeks

Tutorial: Dedicated Server for Lan: Trouble shooting

tutorial to fix errors from Steam or crash the game. steam

:: With a click on / / support / Issues =* get? writing a detailed analysis of your system.

problems with Steam games can be very useful and may help you in your troubleshooting.

opens a window suggests what will start an external protocol request. "Run Application" Click on you start your personal system check. After that then a long list of all the details of your computer.

my time here results including the German Declaration

Important things I've marked the rest can be ignored.

Results // Ergebnis
General System Performance: Passed
Your system meets the requirements for the Source games.
Your CPU: 3006 MHz // Deine CPU
Recommended CPU: 2400 MHz //Empfohlene CPU
Total Memory: 1023 MB // Arbeitsspeicher
Available Memory: 492 MB // verfügbarer Arbeitsspeicher
Recommended Memory: 512 MB //Empfohlener Arbeitsspeicher

Display drivers: Failed
Your ATI display drivers are currently out of date For updated drivers
, click here / / means that your driver is too old and you should update! ! !
Display Adapter: RADEON 9800 PRO (Omega 3.8.231) / / Current Installed Driver Recommended Driver Version
: 8252
Recommended Driver Date: 05/24/2006
Severity: Very High / / severity very high
DirectX: Passed
Your version of DirectX meets the minimum requirements

UDP Ports: Passed
The following UDP ports were reachable.
UDP Port: 27000-27040 / / ports are open from - to

TCP Ports: Passed
The following TCP ports were reachable.
TCP Port: 27020-27040 / / ports are open from - is described by

The following part was still in the background so everything runs , with you, and what you should uninstall or disable.

The offer you can of course be very different things.

Background Processes: Failed
The following background processes were found on your system Please try exiting or uninstalling them, and see if that resolves your issue
Process: C: \\ WINDOWS \\ system32 \\ cthelper.exe
Creative CtHelper background task plug-in manager for Creative drivers can use 100% of CPU / / states that one should uninstall or disable that because it may 100 may have% CPU according to usage.
Severity: Low
Process: C: \\ Program Files \\ Xfire \\ xfire.exe
XFire is running, Which may cause connection Numerous problems with Steam and the online games.
Severity: Very High is / / required ingame so ignore
Loaded Modules: Passed
There were no loaded modules found that conflict with Steam or the games. / / found no other modules affect Steam .
Services: Failed The following services
were found on your system Please try disabling the service or uninstalling the application assoicated with them, and see if that resolves your issue / / modules that have been found and you may disable should the performance increase.
Service: Ati HotKey Poller Ati HotKey Poller
has been reported to cause mouse and keyboard was.
Severity: Low
Layered Service Providers: Passed
There were no LSPs found that should conflict with Steam or the games.
Audio / Video Codecs: Passed
There were no audio / video codecs found that conflict with Steam or the games. / / no problems with sound and audio codecs found
Additional Information


If Steam continues to crash, try deleting all files and folders in the Steam directory except for steam.exe and the SteamApps folder


If you continue to have problems playing the games, try using the launch options-nosound and-windowed.
If you continue to one should try this! play
Open Steam, then Play games / / Open Steam then games
Right click the Souce game, click properties, then Launch options / / right click on the game and select Properties and click Start Options
add-nosound-windowed, click OK, then close. / / stands for most anyway console - behind then each -windowed-nosound and enter what causes the that game in the window and no sound run to test whether it even runs / error fixes. Zb-console-windowed always a space between them.


If you continue to have problems updating Steam, please exit from Steam, and then delete the following files from your Steam directory.
If you still have problems then you should delete the following files from the hard disk ! They are the next starting Steam again downloaded !
C: \\ Program Files \\ Steam \\ Steam.dll
C: \\ Program Files \\ Steam \\ SteamUI.dll
C: \\ Program Files \\ Steam \\ ClientRegistry.blob


If you continue to have problems finding any servers, please exit from Steam, and then delete the following files from your Steam \\ config directory.
If you then still have problems, these files can also delete ! before exit Steam!
C: \\ Program Files \\ Steam \\ config \\ serverbrowser.vdf
C: \\ Program Files \\ Steam \\ config \\ masterservers.vdf


If you continue to have problems with your performance in game, try forcing a lower level DirectX version. Start at the lowest level and go up from there till you find a good level of FPS.
problem can resolve possibly even if you regularly revising the Direct X level
dxlevel-70-
dxlevel 80
dxlevel-81-
dxlevel 90

-Open Steam, then Play games / / right click on the game and select Properties and click Start Options
-Right click the Source game, click properties, then Launch options
add-dxlevel XX, click ok, then close / / there is at most anyway - then each console behind-enter dxlevel 70

greeting [GC] Grimmi & Strike

Lump On A Bearded Dragon Throat

Tutorial!

Here we have ever written a tutorial of what you describe is a Dedicated Server for Dods on the network (LAN) to * create.

Step 1: Invite

you download source dedicated server. This
you go right click on your steam icon, and click Play.
Now you click the top of the tab bar, click Tools.

Step 2:

Right-click on Source Dedicated Server and click Continue to update.




When Steam has finished updating, open source dedicated server.



Step 3:

is now up in game with the pull bar Day of Defeat: Source one.




then you give in server name should have the name of the server. In her
network is a LAN *, and for maximum number game 10 (Or more).
Give a RCON password in your password.



And click on Start Server.
opens
Now (with SP2) * a Firewall window click here easy Unblock.




Step 4: opens

A window that your virtual server.

where you can see how many players are currently on the server, the server name and be more informative. Important

much but that's where the IP is that your server has.
This IP you give on to your team-mates, which therefore can then join your server.





Minimizes the window and starts Day of Defeat: Source.

Step 5: Now click

look her in the game server, and then click LAN *. There you can see
now loving the created server.




then click on Connect and have fun while gambling.


DONE


* LAN = Local Area Network Local Area Network

* SP2 = Service Pack 2 Windows XP update =



MFG [GC] Strike & Grimmi

Nissan Xterra / Off Road Lights

Tutorial: Troubleshooting Steam

If you can have time error ingame sound bugs or something so beautiful ^ ^ ERRORS is his first try. gcf files to defragment.
If that was not to help can have it on your Windows.
Before you try once so wild formatierst this.

Step 1:

Choose your game and right click on Properties.



Step 2: Change

in the properties you on the tab "Local files"

and "Defragment cache files" on

Then he let things rattle, may already have a take some time ... Attention should

coffee and cigarettes lay ready ;-)


Even if the fragmentation reported to be 0% per cent of it but try as it has for me been corrected so many mistakes.

finished

greeting [GC] Grimmi & Strike

How Much Gse Should I Take

Tutorial: Edit demos, record and convert: Good standard Server.cfg in German

Here is a good game.cfg completely in German for dod: s.

respectively, are behind the entries.

At the bottom you'll find the download it.

/ / Name
hostname "server name" / / name of the server

/ / Admin's Email Address sv_contact
"your_email@irgendwo.de" / / Contact e-mail
sv_region 3 / / The region where the server is running 3 = Europe

//--------------------------------------- --------
/ / passwords
//----------------------------------- ------------

/ / sv_password "" / / server password if none is entered, it is a public Serever
rcon_password "secret" / / RCON password

//-------------------------------- ---------------
/ / Fast download
//--------------------------- --------------------

/ / sv_downloadurl "http://www.deine DOMAIN.de / dod /"


/ / - ----------------------------------------------
/ / Voice settings
//---------------------------------------------- -

sv_voiceenable 1 / / Speaking

ingame

sv_alltalk 0 / / Players can hear all 0 = off / 1 = on

//---------------- -------------------------------
/ / Server variables 0 = off / 1 = on
//------------------------------------ -----------

mp_allowspectators "1" / / viewer
mp_autokick "1" / / AFK players kick
mp_chattime "10" / / chat after the final map in seconds
mp_flashlight "1" / Flashlight
mp_footsteps "1" / / Audible foot steps
mp_forcecamera "1" / / viewer camera through the map fly
mp_friendlyfire "1" / / FF = Friendly fire
mp_limitteams "1" / / to be the most a player more in the other team may have
mp_timelimit mp_winlimit "30" / / Time limit in minutes for a map
"0" / / number of rounds, the team won need to use the map changes

sv_allowdownload "1" / / Downloads Maps sounds etc.
sv_allowupload "1" / / uploads eg spray logos
sv_gravity "800" / / World gravity Standard: 800
sv_maxspeed "320" / / Running Speed Standard: 320
sv_timeout "45" / / Number of seconds after no more important player on the server he will be kicked eg client timed out Standard: 65

/ / Cheats

sv_cheats "0" / / Cheats
sv_pausable ;-) " 0 "/ / Pause

/ / VAC

sv_secure" 1 "/ / VAC is enabled

//------------------------- ----------------------
/ / bandwidth settings and rates
//----------------------------------------------

sv_minrate "5000" / / Min bandwidth rate allowed by the server, 0 = infinite. Default: 0
sv_maxrate "9999" / / Max bandwidth rate allowed by the server, 0 = infinite. Default: 0
sv_minupdaterate "20" / / Minimum updates per second allowed by the server. Standard: 10
sv_maxupdaterate "60" / / Maximum updates per second allowed by the server. Standard: 60
decalfrequency "10" / / time interval in seconds before a player can spray their logo again. Stabdard: 10
fps_max "300" / / Maximum number of frames per second fps = frames per sec. Standard: 300

//------------------------------------------- ----
/ / Physical settings
//------------------------------------------ -----

phys_pushscale 5 / / so that objects and bodies fly pretty far ;-)
sv_turbophysics 1 / / belongs to

//----------------- ------------------------------
/ / DoD Extra settings specifically for Day of Defeat: Source
/ / -----------------------------------------------

/ / bonus round

dod_bonusround "1" / / If 1, the winning team which lost the opponents shoot-functional team can not shoot
dod_bonusroundtime "15" / / period begins after the next round. Standard: 15
dod_enableroundwaittime "1" / / timer to wait between rounds. Standard: 1
dod_flagrespawnbonus "1" / / seconds set down the respawn time on flag advantage, it will spawn faster then. Standard: 1
dod_grenadegravity "-420" / / gravity of the shells, flying distance Standard: -420
dod_waverespawnfactor "1" / / Factor for wave respawn timers. Default: 1

/ / Class limit

mp_allowrandomclass "1" / / Allow random class selection (weapon). Standard: 1
mp_bandage_heal_amount "40" / / How much health to give after a successful bandage. Default: 40 available only in future versions
mp_combinemglimits "0" / / Set to 1 to combine the class limit cvars for MG34 and MG42. New limit is sum of two. Default: 0
mp_tickpointinterval "30" / / Time delay between the point award. Standard: 30
mp_limit_allies_assault "-1" / / Class limit for team: USA Class: Assault. Default: -1
mp_limit_allies_mg "-1" / / Class limit for team: USA Class: Machinegun. Default: -1
mp_limit_allies_rifleman "-1" / / Class limit for team: USA Class: Rifleman. Default: -1
mp_limit_allies_rocket "-1" / / Class limit for team: USA Class: Rocket. STANDARD TEST: -1
mp_limit_allies_sniper "-1" / / Class limit for team: USA Class: Sniper. Default: -1
mp_limit_allies_support "-1" / / Class limit for team: USA Class: Support. Default: -1
mp_limit_axis_assault "-1" / / Class limit for team: German Class: Assault. Default: -1
mp_limit_axis_mg "-1" / / Class limit for team: German Class: Machinegunner. Default: -1
mp_limit_axis_rifleman "-1" / / Class limit for team: German Class: Rifleman. Default: -1
mp_limit_axis_rocket "-1" / / Class limit for team: German Class: Rocket. Default: -1
mp_limit_axis_sniper "-1" / / Class limit for team: German Class: Sniper. Default: -1
mp_limit_axis_support "-1" / / Class limit for team: German Class: Support. Standard: -1
mp_rocketdamage "150" / / damage caused by missiles. Standard: 150
mp_rocketradius "200" / / radius for rocket damage. Standard: 200
mp_warmup_time "0" / / Warmup time in seconds. Default: 0
sv_autojointeam "0" / / Automatic class selection is possible only if 1 Default: 0

//------------------------------------------- ----
/ / Maps
//--------------------------------------- --------

mapcyclefile "mapcycle.txt"

//------------------------------ -----------------
/ / server log files for statsme or hlstats x
//------------------- ----------------------------

log "on" / / Log files on / off - on / off
sv_logecho "1" / / echo information in the log console. Standard: 1
sv_logfile "1" / / Log server information in the log file. Standard: 1
sv_log_onefile "1" / / Log server information store in one file. Default: 0

//------------------------------------------- ----
/ / start other applications
//------------------------------------ -----------

exec exec mani_server.cfg
banned.cfg

greeting [GC] Grimmi & Strike

right click "save as"

download this game or server.cfg

Shannon Whirry Shaved

Tutorial: Installing a Linux server

tutorial to install a Linux server that needs ROOT right:


Required program this:

PUTTY <-- Die oberste putty.exe dort herunterladen und starten.

"host IP" In the IP (eg 87.106.2.76) or enter the domain without "www" example "geierclan.de" then then ENTER


login with the user name here "root" and then enter the password.
The cursor does not move at the input of the password, so do not be surprised, after
and confirm with ENTER you're on the shell / console of your server.

should navigate to simpler to install the Midnight Commander.



the Midnight Commander and create a user with putty:

The Midnight Commander is very similar to Windows Explorer and helps move a lot while. For example, most commands
must not be entered by hand into the console and can for example be activated by the Enter key.
enter in the console "yast" a then, alternately you to "install and remove software".
arrow keys and Enter to navigate (mouse iss not allowed in here). What exactly You have to press is always underneath
Where a letter is always hevorgehoben. The command is then executed with ALT + letter.

	Source
	"ALT" + "S" Press enter to look for "mc" to the Midnight Commander install. "ALT" + "a" enter to confirm.

Then the "mc" installed.
Under "Security and Users" can you have to create users to access via ftp to the server (eg maps and mani_plugin)



first HLDSupdatetool download and install.

First you have to create you a folder and the hldsupdatetool download from Valve.
There you must then run hldsupdatetool.
behind the / / declarations are what will be done so everything before the / / do not type more than that!


entries in putty:
Please enter exactly as I wrote it because Linux complains immediately if only one character is wrong.

Source

mkdir srcds / / = make directory created a folder called srcds srcds cd / change directory = changes in this directory wget http://www.steampowered.com/download/hldsupdatetool.bin / / so that you download directly to your server, the update tool down chmod + x hldsupdatetool.bin / / so that you make the file executable . / hldsupdatetool.bin / / so that you lead as tool from . / steam / / so that you lead steam from

Note: After starting with

.

	Source
	/ hldsupdatetool.bin

will ask you "agree with the terms of conditions" have the answer you with "yes" .

Then run the command again

	Source
	. / Hldsupdatetool.bin

Now the latest version of the hldsupdatetools downloaded and then you land automatically in
the console.

If the following error message appears then the note here!

sh: uncompress: command not found

Entry:

.	Source
	/ hldsupdatetool.bin

error message:

	Source
	sh: uncompress: command not found

The enter here so:!

	Source
	ln-s / usr / bin / gunzip / usr / bin / uncompress

Then the command . / hldsupdatetool.bin run again, then it should go. can


2) Download the file

Now you begin the download of files. The
but depending on how the Valve servers are burdened take several hours.

	Source
	. / Steam-command update-game "dods"-dir.

you smoke and you drink ne box tilting ne pot of coffee ;-)


3) Starting srcds


Now you can start srcds.

	Source
	. / Srcds_run -console-game dod + map dod_flash maxplayers-16-autoupdate

your srcds server starts now.

Extra: A server startup script so you do not type everything again must

will create a script that automatically starts srcds to prevent the event of a crash, be entered everything again from scratch.
A file in the folder, create dod:

	Source
	touch server.sh / / this is the command to create the file names server.sh

contents of the boot file / script:

	Source
	* #! / bin / screen sh echo "Starting dods server sleep 1 -A-m-d-S dods- server. / srcds_run-console -Game dod + map dod_flash + maxplayers 16-autoupdate

With this command, you make the file executable:

	Source
	chmod + x server.s

If you want to start your server you just have in your srcds into another folder. / server.sh
or enter you navigate to the MC and press ENTER to start the server.sh.
With this command you land directly into the games console and are thus directly on the game server.

	Source
	screen-x-server dods

's where you'll also

	Source
	say hello

enter will appear in-game chat "Console hello


Note: If you in the Game Console " exit " runs typing the server down and start all over again, which is very annoying and sometimes even up to 10 min. may take.

If you only download from the Game Console, want to restart without, you have "ctrl + a + d" enter
, then you land back in the normal console.

finished


greeting [GC] Grimmi & Strike

[EDIT] Small Linux "how to" for runnaways ;-) WARNING only for advanced users.

you install with "yast" in the command prompt from the putty "mc" = similar to Midnight Commander in the Win Explorer.
can thus be much easier to navigate within the server.

commands: start

startup script: the Midnight Commander ENTER to server.sh

A display of all running processes you will get with "top"

sort the processes according to RAM with "shift + m" , then run the DOD server at the top because it consumes the most resources.

"srcds_amd" + "srcds_run" is or are the instances for the server or servers

with "Ctrl + C", "F 10" or "q" you come from most scripts and
from the top back out.
Normal Server Console you can "exit" leave and Prgramm putty close
If you want to shoot the dod server, the dod directory change "F 10" and "killall srcds_amd" enter terminates all processes of srcds_amd instance / en. Then you can
with "top" and "shift + m" You can see how the server restarts.

"killall srcds_amd" shoots only the server and the startup script starts the server again automatically.
"killall srcds_run" shuts down the server and it starts not again automatically!

greeting Grimmi

Finnish Sauna Erection

Tutorial!

Here we have ever written a tutorial of what you describe is how to record a demo in Dods, and they then worked. Avi * converts.


INFO:

This tutorial requires basic knowledge and a lot of storage space!


The programs you need:

Able Graphic Manager Download

Video Mach 3.1.7 Download

Step 1: you must take

a demo it in your console enter:

record name.de (name may be modified)

now takes the Console during If you play a demo from your point of view.

to stop the recording, you have to enter into the console Stop .

is now the demo in your dod folder found at

C: \\ Program Files \\ Valve \\ Steam \\ steamapps \\ YOUR ACCOUNT NAME \\ day of defeat source \\ dod

Step 2:

want Filters To view the demo you have in the console enter the following

playdemo name.de

Now ye out the scenes you have later in your video, plus you have the following in the console enter

startMovie Name (again, the name changed beleibieg)

Now Draws The console about 30 frames per second on, so do not be surprised if it shakes. Terminate

the recording, enter the following into the console

Endmovie

Repeat this step until you have all the scenes for your video.

But never take the same name!

If you now in your dod folder is found at

C: \\ Program Files \\ Valve \\ Steam \\ steamapps \\ YOUR ACCOUNT NAME \\ day of defeat source \\ dod

you will find that there are now lots of TGA * files.

Step 3:

Installs Able Graphic Manager and opens it. click

now click on the button "batch process"

her on "Add Files" unf fits all the TGA files from your a * dod folder.

Below you then click "Browse" and determines the location.

Daunte her up in the pull-down list the target format * BMP.

so shall the look:



Then click on Start.

Now Able Graphic Manager converts the files into TGA * BMP * drawings.

Step 4: Install
you
Video Mach 3.1.7 and opens it.

now click links on the folder and add your loving converted a BMP Pictures.

Now you can watch each and may remove or move.

In order to process the images and add effects to right click the folder, and then seek out the effects of the use you want.

the right of the screen you see then what bewirgt the effect.



Also music you can simply insert the left folder your song and select Paste. The music file will appear in the music list, and can then be processed there.

Step 5:

Now click on the disk in the middle, it opens a window which is called the Output Settings, there you will be together one if you want to convert only the video or your video with your music .

After you choose the location, the name of the video and the format * AVI.



being checked even if you have enough memory in the destination directory also.

for about 100 * BMP images produces about 25 MB!

then click Start.

Now Converts Video Mach 3.1.7 your images to an AVI * Video.

This process takes, depending on the quantity of images for some time.

DONE


* TGA = Targa = Truevision Advanced Raster Graphics Array

* AVI = Audio Video Interleaved

* BMP = Windows Bitmap = Device-Independent Bitmap




MFG [GC] Strike & Grimmi

Sharp Pain Elbow Touched

Tutorial : X - Fire ingame settings

General:

X - Fire is a chat program specially designed for gamers which currently supports around 200 games.

Download:

can Get it here -> download <-

Installation: follow

Easy installation routine and everything OK or Yes to confirm.

Appearance:

can be seen on the image to my server and right again is an information window and how many who play on the server now.
Click on the mini joypad bottom right you can follow his friend on this server.
If * TS (Team Speak) to get installed by clicking on the microphone on each TS server.

game:

standard setting for opening the chat window the game KEY ROLES and X button compressed.
We recommend that in the options to switch to other keys are closer together.
example ALT and O or CTRL and X. game permanently Mode:

The permanent mode can be activated when the ingame chat - window is open and you F2 suppressed.
The rest can then use the arrow keys to navigate and each ENTER. There is also the
permanently hidden mode so you can see the little window again and never missed a message, even if several people write a .

size, position and transparency can be defined so well.

online time and banners:

Another highlight is the X-Fire also counting the hours played online and has the most plays Game then you can also view a forum for example. The
happens in a banner which is provided by x-fire and can also look in slightly changed. Easy to
- go> click <- and enter your x-fire name.
Our two banner you see above in the main window of the online or offline status is also displayed there or even if you're playing.

finished

greeting [GC] Grimmi & Strike

Single Seater Sand Car

Tutorial: Optimize Netsettings!

Here we have ever written a tutorial that will help you set your Netsettings Best.

INFO:

Depending on your connection, there are other Netsettings, so we have a list for the respective Internet connections created.

[EDIT]: there for you no! correct values!

I have in the past few weeks very well of them and I certainly read 1000 threads on this subject.
Conclusion: Everyone has to figure out "his" own values themselves and that is only by testing, testing and testing again.
Each player has his own preferences and habits, and everyone can play better and better so.
So do not mess up and take our values as rough values for the type of connection, which should itself be adjusted.
Please remember the game is the "netgraph" choke and loss, if possible, always stay on ZERO!
Have you always choke So take more or less you have to lower your rate> cl_cmdrate and cl_updaterate, each in increments of 10.

greeting Grimmi

See also optimize Netsettings II!


LAN: rate

cl_cmdrate 20 000 400.05 100.05
cl_updaterate
cl_cmdbackup 2

56K MODEM:

rate 4000
cl_cmdrate 32
cl_updaterate 25
cl_cmdbackup 8

ISDN:

rate 6500
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 20

D-ISDN:

rate 9000
cl_cmdrate 50
cl_updaterate 33
cl_cmdbackup 60

S-DSL:

9000 rate
cl_cmdrate
cl_updaterate 33 50 60

cl_cmdbackup

A-DSL:

rate
cl_cmdrate 40 12 000 30

cl_updaterate cl_cmdbackup 2

WIRES:

rate 9000
cl_cmdrate 40
cl_updatrate 25
cl_cmdbackup 40

Q-DSL:

rate
cl_cmdrate 12 000 35 400
cl_updaterate
cl_cmdbackup 60

DSL + FP *: rate

cl_cmdrate 12 000 40 30
cl_updaterate
cl_cmdbackup 2

STANDARD:

rate in 2500
cl_cmdrate 30
cl_updaterate 20
cl_cmdbackup 2

step 1:

you drug out of your connection type, and replaces values to find in your Config.cfg under

C: \\ Program Files \\ Valve \\ Steam \\ steamapps \\ YOUR ACCOUNT NAME \\ day of defeat source \\ dod \\ cfg

eg: DSL + FP sees this:





Stores all depends.


* FP = Fastpath

We do not guarantee improvement, but we can recommend these values.

DONE


MFG [GC] Strike & Grimmi

Calculate Primer Annealing

Tutorial: HP and location status at the push of a button!

Here we have ever written a tutorial that will help you to display your location and your Hp * quickly, that you support from your teammates gets.

Step 1: Open your

Config.cfg found at

C: \\ Program Files \\ Valve \\ Steam \\ steamapps \\ YOUR ACCOUNT NAME \\ day of defeat source \\ dod \\ cfg

Step 2:

add the following line

bind "F2" "voice_backup; say_team I am at / at% l with% h HP and I need HELP!

The F2 key can be replaced by another free key.

If you press F2 in the game now you call for support and the team chat is for example your site. Fountain and your Hp number provided.

knows where every teammate and since you need her help.

very helpful if you at a flag since the one has to take a couple.

* HP = Health Points = Health

finished

MFG Strike & Grimmi

Cartier Paris Quartz Swiss 20-61323 1970

Tutorial: keybindings ingame

ingame So you can make some things differently you must rewrite your config.cfg.
Here is a picture of the entire American keyboard layout with buttons descriptions as they are called.

Now you can using your config.cfg see which keys are already in use and which are still free and the rest of them.

greeting [GC] Grimmi & Strike